Publicité
Les langues disponibles
Les langues disponibles
Network update
Press MENU on the remote control, then
select OPTIONS > Network Update.
Select On/Off to enable or disable the
Network update function.
When this function is on, the TV will
automatically update channels if your
DTV service provider updates his DTV
network.
When this function is off, you need
to run channel searching again to get
new channels or remove unavailable
channels if your DTV service provider
adds or removes channels from their
DTV network.
Common interface
Scrambled digital TV channels can be
decoded with a common interface module
and a card provided by a digital TV service
operator.
The common interface module may enable
several digital services, depending on the
operator and services you choose (for
example, pay TV). Contact your digital TV
service operator for more information about
services and terms.
Use the common interface module
WARNING: Switch off your TV before
inserting a common interface module.
Be sure to follow the instruction
described below. Wrong insertion of a
common interface module may damage
both the module and your TV.
1.
Following the directions printed on the
common interface module, gently insert
the module into the common interface
slot on the TV.
2.
Push the module in as far as it will go.
3.
Turn on the TV and wait for the common
interface function to be activated. This
may take several minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.
Access common interface services
After inserting and activating the common
interface module, press MENU on the
remote control and select OPTIONS >
Common Interface.
This menu option is only available if the
common interface module is correctly
inserted and activated. On-screen
All manuals and user guides at all-guides.com
applications and content are provided by
your digital TV service operator.
Software update
Press MENU on the remote control and
select OPTIONS > Software Update.
Press OK/ to enter. (Refer to Figure 5.)
•
•
•
Change to Shop or Home mode
1.
2.
3.
Note: According to the regulation of
European Commission 2009/125/EC, in
Home mode, TV will be put into standby
mode automatically if there is no operations
in 4 hours. This feature can be deactivated
in OPTIONS menu.
MHEG function
Some digital TV broadcasters offer dedicated
digital text or interactive services (for
example, BBC1). These services work like
normal Teletext with the addition of number,
colour and navigation buttons.
1.
2.
Current Version
: Checks the current
version of the software.
Product Name
: Displays the product
name of your set.
OAD
(over air download): Enables you to
install the latest version of the software
if available. Select OAD and press OK/
to enter.
Use
/
to
select Yes under Auto
Download to automatically download
the latest software if available. After
the software has been downloaded
successfully, you will be prompted to
decide if you want to install it right now.
If yes, follow the hints on the screen to
complete your installation. You can also
select to ignore the installation here.
Select
No under Auto Download to
decline the automatic download.
Select
Manual OAD Download and
press OK/ to start manual scanning
the latest software. Follow the hints on
the screen to complete. During the scan,
press OK/EXIT to cancel or exit the
process.
Press
MENU on the remote control and
select OPTIONS > Location.
Press
/ to select your location Shop
or Home.
EXIT to exit.
Press
Press
MENU on the remote control and
select OPTIONS > Subtitle > Subtitle.
Press
/ to set Subtitle to Off.
14
Publicité
