Wagan Tech 4800 Guide D'utilisation page 8

Solar + LED Floodlight
Wall Mount:
1. Before installation, make sure the 4 bottom screws are tightened.
2. Drill 2 holes 4 inches apart.
3. Mount to the wall with expansion bolts (not included).
After installation, the light angle can be adjusted.
Light angle can be adjusted by loosening the bolts on the side of the bracket, as shown in the
diagram below.
8
4800 by Wagan Tech
™
1
1
10°
www.wagan.com
®
2
3
2
20°