Publicité
Les langues disponibles
Les langues disponibles
Thank you for purchasing this Hampton Bay interior portable luminaire. This
product has been manufactured to the highest standards of safety and quality.
The durable finish and glass shade design provide for care-free maintenance.
Simply wipe with a clean towel to keep looking showroom new.
FEATURES:
1. Durable easy to maintain finish; simply wipe with a clean soft cloth to
keep looking new.
2. Three-way switch provides just the right amount of light where it is
needed. Adjustable reading lamp offers direct light.
3. Popular E27 lamp holder may be fitted with a CFL equivalent energy-
saving bulb.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU 331-434 Antique Bronze Floor Lamp when speaking to a Customer
Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on
a clean flat surface. Inspect each part for defects that may have occurred
during shipping.
Important: Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a defect in the wire,
DO NOT continue the assembly operation. Please call our Customer Service
Team at 1-877-527-0313.
2.
CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3.
Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY:
1-150 watt maximum 3-way and
1-60 watt maximum type A bulb
(or CFL equivalent bulbs)
(not included)
Page 2
All manuals and user guides at all-guides.com
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 ea – Ring (H, K)
1 ea – Tube (E)
ASSEMBLY INSTRUCTIONS:
1. Screw the Tube (B) clockwise onto Base (A)
2. Repeat step 1 with Tubes (C), (D) and (E). Pull
3. Screw the Socket Assembly Cup (F) clockwise
4. Remove the Ring (H) from the socket cover (F).
5.
6. Remove the Ring (K) from the socket cover (I).
7.
8. Install a 150-watt maximum Type A (or CFL
Page 3
1 ea – Shade (G)
1 ea – Socket
Assembly Cup (F)
until tight.
any excess wire from step 1 and 2 through Base
(A).
onto Tube (E). Important: Excess wire between
Socket Assembly Cup (F) and Tube (E) must be
tucked into Tube (E). DO NOT ATTEMPT to
pull excess wire from step 3 through Base (A).
Place the Shade (G) onto the Socket Assembly
Cup (F). Screw Ring (H) clockwise onto
threaded socket cover to secure the Shade.
Place the Shade (J) onto the Socket Assembly
Cup (I). Screw Ring (K) clockwise onto
threaded socket cover to secure the Shade.
equivalent) bulb into Socket Assembly (F) and
a 60-watt maximum Type A (or CFL
equivalent) bulb into Socket Assembly (I).
1 ea – Shade (J) 3 ea – Tube (B, C, D)
1 ea - Base (A)
Publicité
