Publicité
Step 9
Push two CROSS-SLOTTED DOWELS (24F) into the
å
STRETCHER (K) as shown in the upper diagram.
NOTE: The threads in the DOWEL should be pointed
å
toward the hole in edge of the STRETCHER.
Next, fi ll the holes in the short edge of the STRETCHER (K),
å
1/4 to 1/2 full with GLUE (54M).
Fasten the STRETCHER (K) to the SKIRTS (L and M). Use
å
two BLACK 2-3/8" FLAT HEAD BOLTS (103S). Wipe away
the excess GLUE.
NOTE: Be sure the WOOD DOWELS in the SKIRTS insert into
å
the holes in the STRETCHER. Wipe away the excess glue.
You will need to widen
the SKIRTS (L) slightly to
fasten the STRETCHER (L)
between them.
54M
24F
www.sauder.com/services
All manuals and user guides at all-guides.com
L
K
The slot should face up and
toward the short edges of the
STRETCHER (K).
BLACK 2-3/8" FLAT HEAD BOLT
(2 used in this step)
K
54M
418213
Fill the holes 1/4 to 1/2
full with GLUE.
103S
L
Page 13
Publicité
