Télécharger Imprimer la page

Germ Guardian H4600 Instructions D'utilisation Et D'entretien page 2

Publicité

Les langues disponibles

Les langues disponibles

READ AND SAVE THIS MANUAL
SPECIFICATIONS
Model Number: H4600
Humidifying Mode: Combination
Power Supply: 120V 60Hz
Power Consumption: 140W
Maximum Humidity Capacity: High Mist - 1.4 gallons/24 hours; Low Mist - 0.5 gallons/24 hours
Tank Capacity: 2.4 gallons
Successive Humidity Hours: Up to approximately 120 hours depending on environmental conditions
Dimensions: Width - 10 inches; Length - 15 inches; Height - 12 inches
Weight: 7.35 pounds (not including packaging)
PARTS
Tank Lid
Night Lamp
Power
Plug
Cool/Warm
Selection Button
Power Button
Spray Control
Button
E-2
All manuals and user guides at all-guides.com
Spray Spout
Handle
Tank
Spout Guide
Blast Port
Body
READ AND SAVE THIS MANUAL
Night Light/Lamp
Provides a soft ring of blue light
with ON/OFF switch.
Cool/Warm
Select humidifying temperature
based on need. Warm humidity
will use more power, but will
humidify room quicker.
Power
Turns humidifier ON/OFF.
Spray Control
Adjusts spray between low,
medium and high.
Level of Spray Indicator Lights
As spray is adjusted from low
to high, the arches of lights get
higher and higher.
Warm or Cold Humidification Selection
Select humidifying temperature based on need. Warm humidity will use more
power but will humidify your room quicker.
Water Shortage Indicator
When the unit is low on water the Refill LED on the front panel will light up,
and the unit will shut off. Simply add more water to continue use. Unit will
automatically resume running when water tank has been refilled.
Spray Volume Adjustment
The spray volume or amount of mist that is produced by the unit can be adjusted
based on need. It can be changed from low to high by pressing the SPRAY CONTROL
button on the front panel.
Silver Clean Technology
Unlike other humidifiers that grow slimy mold and bacteria, the Germ Guardian
Ultrasonic Humidifiers uses Silver Clean technology embedded in the tank to
fight the growth of bacteria and mold on the surface of the water tank.
E-3

Publicité

loading