Iso-Tech ILCM 06 Manuel D'instructions page 12

All manuals and user guides at all-guides.com
Caution
1. To avoid electric shock, remove the instrument from
any circuit under test before replacing the batteries.
2. Do not mix batteries of different types or old and
new batteries.
3. Check the battery polarity carefully when inserting
the batteries.
4. Do not short-circuit used batteries, disassemble
them, or throw them in a fire. Doing so may
cause the batteries to explode.
5. Dispose of the used batteries in accordance
with local regulations.
SeCtIOn 4 - MaIntenanCe
Do not attempt to repair this instrument
It contains no user-serviceable parts.
Repair or serving should only be
performed by qualified personnel.
Cleaning
Periodically wipe the case with a dry
cloth and detergent, do not use abrasives or solvents.
SeCtIOn 5 - SPeCIfICatIOnS
general Specifications
LCD display digits: 6000 digit large scale
LCD readout.
Measuring rate: 5 times / sec.
Overrange display: Shows the real value for "100A"
and shows "OL" for other ranges.
automatic power off time: Approximately 20 minutes
after power on without operations.
Low battery indicator: Replace the battery when the
indicator appears in the display.
+
Power requirement: 1.5V x 2 batteries.
Battery type and life: Alkaline AAA, R03 or UM4.
60 hours typical.
ILCM 06 English
11