Daspi HARD Manuel D'instructions page 6

g
eneral safety rules
Our compliments for your excellent choice. Your new
electromechanical operator has been produced according to a
high quality and strict reliability, that's why it will assure you
long-lasting performance. This booklet will offer you all the pieces
of information you may need to install your operator and to safe
guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution
is unquestionably indispensable and nothing is better than
preventing accidents.
i
Mportant
Any installation or repair, or adjustment of the working machinery
by unqualified people is strictly prohibited unless all the necessary
precautions: power supply disconnected (included possible
batteries). All moving mechanism must be provided with suitable
protections.
DASPI is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for
this booklet and/or any unauthorized modification of the product.
Keep scrupulously this booklet enclosing it with technical brochure
of installation in a suitable place well-know by all the interested
people. You have to operate the elimination of the packing
material (cardboard, plastic, polystyrene, etc.) in conformity with
the regulations in force, remembering that for a child a plastic
envelope could be extremely dangerous. You have to teach the
people employed in using the automation about the control and
s M
ecurity echanisM
in MouVeMent
distance
ProDuCt
The gear motor HARD has been planned and built in
order to opening swing gates with leaves length max
3,5 mt. and with a maximum weight of 250 kg. DASPI
is not responsible for any anomalous and different use
of the gear motor HARD.
IMPORTANT: The gear motor HARD is not provided
with mechanical clutch and must be installed with its
DASPI control panel or with a control panel provided
with electronic clutch.
use oF tHe autoMatIon
Important safety instructions. Warning: it is vital for the
safety of persons to follow all instructions. Save this
instruction. Do not allow children to play with remote
controls or fixed controls. Keep remote control away
from children.
As the automation can be controlled from the distance
through a remote control, you must always check the
full efficiency of all the safety devices. We recommend
inspecting periodically (every 6 Month) by qualified
people the adjustment of the electronic clutch. If you
need to calibrate the protection consult the paragraph
"Adjustment of the electronical clutch" in the instruction
booklet of the electronic central unit.
All manuals and user guides at all-guides.com
englIsH
d e
o not install the lectric shocK
autoMation in place
Full oF explosiVe
security systems of the installation.Don't install this product in
explosive places.
u
pkeep
For any kind of upkeep, you have always to cut off the power
supply.
For a correct upkeep of the installation where you have installed
the gear motor HARD follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the
paragraph "Installation of the electronic central unit").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
d
eMolition
You have to operate the elimination of the materials in conformity
with the regulations in force. All material must be divided by type
(copper, aluminium, plastic, electrical central unit). However there
are not material considered dangerous for the handler.
d
isMantling
In order to dismantle or to move away the automation, follow
these instructions:
Cut off the power supply and disconnect the electrical
installation.
Dismantle the control console and all the other components of the
installation.
If you have noticed that some components have been damaged,
you have to replace them.
u
se
the gloVes
PrelIMInary CHeCks
• Read carefully the instruction.
• Check that the product has not been damage during
the transport.
• Check that the gate structure is strong and that during
its movement there aren't friction points
• Check that the electrical installation is in accordance
with the characteristic required by the gear motor.
• Check that there is a suitable ground safety system
and that the metallic parts of the installation are
connected.
• Check that the manual manoeuvre always is easily
practicable.
• Remember that the automation makes easy the use
of the gate but don't resolve the problems due to a
defective installation or to a faulty of upkeep.
lubrIFICatIon
The gear motor HARD is provided with permanent
lubrification
u K
se glasses eep the protection
For Welding carter