Assembly - HOLZMANN MASCHINEN ABS 850 Mode D'emploi

Use only permitted extension cable with cross-section
Voltage
220 V-240 V
50 Hz

14.4 Assembly

1. Place the lower bracket on the floor and
loose the bolts M6x35mm on the
connector.
2. Set side bracket into the connector,use
the bolt M6x35mm thread the hole and
tighten them.
3. Install the bottom panel on the lower
bracket
HOLZMANN MASCHINEN GmbH
NOTICE
the one in the following table declared.
Extension
<105 m
www.holzmann-maschinen.at
<27 m
<44 m
<70 m
ASSEMBLY
Cross-section
1,5 mm 2
2,5 mm 2
4,0 mm 2
6,0 mm 2
ABS 850
26