HOMEKRAFT FERRO Guide D'utilisation page 24

[1200 ml] (3).
4. Insert the selected products into the container.
5. Place the cover (4) onto the 1200 ml container (3), and rotate it clockwise
until the lock clicks
6. Connect the device to a mains socket.
7. Turn on the food processor by setting the switch on the selected program.
NOTE! THE FOOD PROCESSOR IS EQUIPPED WITH SPECIAL LOCKS THAT PREVENT SWITCHING
THE DEVICE ON IN CASE OF IMPROPER ASSEMBLY OF ITS PARTS!
You may add individual ingredients through the inlet (5), which is located on the container
cover.
WORKING WITH WHISKS/PLASTIC STIRRER (FIGURE C.)
- whisking eggs,
- kneading dough (soft),
1. Connect the drive axle (2) to the base with the motor (1).
2. Place the container [1200 ml] (3) on the base with motor (1) and turn it
clockwise, until the lock clicks.
3. Attach the whisks (16) on the drive axle (2) which is inside the container [1200
ml] (3).
4. Break and pour the eggs into the container.
5. Place the cover (4) onto the 1200 ml container (3), and rotate it clockwise
until the lock clicks
6. Connect the device to a mains socket.
7. Turn on the food processor by setting the switch on the selected program.
WORKING WITH SELECTED INSERT FOR GRATING/SHREDDING (FIGURE D.)
- shredding of vegetables, fruit, meat,
- grinding of meat,
- grating carrots,
1. Connect the drive axle (2) to the base with the motor (1).
2. Place the container [1200 ml] (3) on the base with motor (1) and turn it
clockwise, until the lock clicks.
3. Connect the selected insert (20), (21), (23), (24) with the bracket for inserts
(22).
4. NOTE! Perform this carefully, as inserts are very sharp!
5. Place the bracket for inserts (22) with the selected insert onto the drive axle
(2).
EN
24