Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing the 2.5" HDD
To install the 2.5" HDD:
1. Follow steps 1-6 under the Installing or upgrading memory
modules section to remove the bottom cover of your VivoMini.
2.
Align the bundled bracket on each side of the HDD and insert
four (4) screws to secure the 2.5" HDD to the bracket.
3.
Connect the bundled HDD cable to the HDD (A), then secure
the HDD and bracket to the bottom cover of your VivoMini
using the four (4) bundled screws (B).
VivoMini UN Series
32
Publicité
Table des Matières
