Viessmann Tecto SV5 Mode D'emploi page 5

2. General information
Tecto SV5 is a vertical, refrigerated display cabinet for remote installations. The equipment feeding the
refrigerant is housed in a separate, remote room. The cabinets are connected to a central refrigerant line
running from the room to the cabinets.
Tecto SV5 cabinets can be installed individually or in parallel. Each cabinet is individually temperature
controlled and comes pre-set to the correct temperature, as determined during product order.
Heat loss is minimised by a steady vertical airflow in front of the shelves. Maintaining a tight seal on the glass
doors and a steady airflow is crucial for the proper operation of the cabinet.
2.1. Main components
A Control unit with light switch*
B Honeycomb
C Electrical junction box (on the back wall)
D Equipment nameplate and loading instructions
E Suction grid
F Evaporator (underneath bottom plates, behind fans)
G Evaporator fans (underneath bottom plates)
*
Optional
Note!
When placing the electrical junction box on the cabinet roof, use a protective covering to avoid scratching.
EN DE ES FR PL RU NL FI SV NO DA EE LT LV
4