CEBEK TL-310 SMS Mode D'emploi page 3

TL-310SMS
Step 2: Set language.
The language configuration can only be done from the master telephone number.
Send SMS to the phone number of the SIM of the TL-310SMS with the text:
1.0 To configure in Spanish.
1.1 To configure in English.
The TL-310 SMS will reply with an SMS only to the master telephone number.
Step 3 : Configure the name of the installation.
The configuration of the name of the installation can only be done from the master telephone number.
Send SMS to the phone number of the SIM of the TL-310 SMS with the text:
2. installation name Do not forget to put the (.)
The name of the installation, to have a maximum of 15 characters, accepts letters and numbers.
Note: If the name is longer than 15 characters, the TL-310 SMS will respond with an SMS with the text "CMD VERY
LONG".
The TL-310 SMS will reply with an SMS only to the master telephone number.
Note: To change the name of the installation, repeat step 3.
Step 4 : Enter phone numbers :
Telephone numbers 2 and 3 can only be entered from the master telephone number
Send SMS to the phone number of the SIM of the TL-310 SMS with the text:
3.1.+ country code phone number 1 to enter phone number 1
3.2.+ country code phone number 2 to enter phone number 2
Note 1 : Remember to put the + country code before the telephone number
Note 2 : Don't forget to put the . before + country code and phone number
Note 3 : If the phone number is longer than 15 characters, the TL-310 SMS will respond with an SMS with the text
"CMD VERY LONG".
The TL-310 SMS will reply with an SMS only to the master telephone number
Delete phone numbers.
Telephone numbers 1 and 2 can only be deleted from the master telephone number.
Send SMS to the phone number of the SIM of the TL-310 SMS with the text:
3.1.0 to delete phone number 1
3.2.0 to delete phone number 2
Note: When deleting a phone number it will remain empty.
Note : The master telephone number cannot be deleted.
The TL-310 SMS will reply with an SMS only to the master telephone number.
Change phone numbers.
Telephone numbers 1 and 2 can only be changed from the master telephone number.
Send SMS to the phone number of the SIM of the TL-310 SMS with the text:
3.1. With the new phone number 1, change phone number 1..
3.2. With the new phone number 2 change phone number 2 .
Note 1 : Remember to put the + country code before the phone number.
Note 2 : Don't forget to put the . before the + country code and the phone number.
The TL-310 SMS will reply with an SMS only to the master telephone number.
Step 5 : Check TL-310 SMS data.
The verification of the entered data can only be done from the master telephone.
Send SMS to the phone number of the SIM of the TL-310 SMS with the text:
4. Don't forget to put the .
It will respond with an SMS with the internal data stored only to the master telephone number.
Installation
Master phone number
phone number 1
Telephone Number 2
Note: In the event that all the data is not entered, it will respond with "EMPTY" to the data that is missing.
Step 6 : Factory reset
The factory reset erases all the data saved in the TL-310 SMS.
Disconnect power, open the box to access the RESET button.
With the RESET button pressed, connect power to the circuit.
Wait 10 seconds until the relay confirms with a pulse of 0.1 seconds the reset of the circuit
www.cebek.com - sat@fadisel.com
3