Télécharger Imprimer la page

dweLED WS-W24509 Instructions D'installation page 2

Publicité

INSTALLATION INSTRUCTION
Steampunk - Outdoor
WS-W24509/WS-W24509F/WS-W24513/WS-W24513F
Ø3 1/2"
Ø2 7/10"
3 3/5"
3 8/10"
3. Secure the mounting back plate to the junction box using standard junction box screws that comes with the junction box.
Note: (i) using any other non-original-manufacturer provided junction box screw may result in safety issue;
(ii) The side of the mounting back plate marked "GND" must face out.
to the back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
6. Put the glass into the cage, secure with glass cover by using four screws (E), make sure it is screwed tight to prevent water splash inside.
7. To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. indoor/outdoor silicone sealant to
Phone (800) 526.2588
Fax
(800) 526.2585
Screw
4/5"
Glass Cover
Glass
(RPL-GLA-24509)
RPL-GLA-24513)
1/5"
Cage
Fixture Wires
House Wires
Black or
Black
Smooth
(Hot)
Fixture Wires
House Wires
White or
White
Ribbed
(Neutral)
Fixture Wires
House Wires
Bare wire
Green or Bare Copper
(Ground)
(Ground)
44 Harbor Park Drive
Port Washington, NY 11050
Fixture Screw
Canopy
Screw
Nut
1600 Distribution Ct
Lithia Springs, GA 30122
Mounting Plate
Nipple
Wiring
Connector
Junction
Box Screw
Silicone Washer
y for installation.
f your outlet
d wire directly
1750 Archibald Avenue
Ontario, CA 91760
Junction Box
2

Publicité

loading

Ce manuel est également adapté pour:

Ws-w24509fWs-w24513Ws-w24513f