Tecknet iEP1200 Mode D'emploi page 3

All manuals and user guides at all-guides.com
Specifications
Product Name: TeckNet iEP1200 USB Power Bank Battery
Type: Li-ion Battery Capacity: 12000mAh
Input: DC 5.0V, 1.2A max Port 1 Output: DC 5.0V/1 .0A
Port 2 Output: DC 5.0V/2.1A
Compatibility
iPad, Mobile Phones, iPhone, iPod, more than 85% of Samsung Galaxy
Tablets, and all other digital devices requiring charging through a DC 5.0V
1A or DC 5.0V 2.1A USB port.
Note:
Your original USB data cable might not be suitable for use with this Power
Bank to re-charge your device. Please use the supplied USB to Micro USB
cable.
Using your iEP1200 Power Bank
1. Charging the power bank
You can use the included USB-Micro USB cable to charge the iEP1200
Power Bank from a USB power source.
Note:
While the iEP1200 Power Bank is being charged, the blue LED
indicators will flash. Once the Power Bank is fully charged, all LEDs will
light up and the Power Bank will stop charging. Then, simply disconnect
from its power source, and you power bank is now ready for use.
The Power Bank will not provide power output during the charging
period.
2. Recharging Your Mobile Device
Connect your iPad, mobile phone or any electronic device compatible
with this Power Bank. Press the power switch to start charging your
device.
To stop charging your device, simply disconnect it from the Power Bank.
The power output will remain on for 45 seconds and will stop
automatically if the Power Bank does not start to charge a device within
this period.
2