Binatone CI-560 Manuel D'instructions page 6

All manuals and user guides at all-guides.com
DESCRIPTION OF
COMPONENTS
1. Non-heating tip
2. Work surface
3. Hair clip
4. Lever
5. Handle release button
6. Indicator light
7. Operation mode switch
0 – appliance is off;
1 – heating mode
8. Base
9. Revolving power cord
10.Handle
BEFORE FIRST USE
Wipe the appliance with a soft cloth
and put it on a dry even surface.
Before using the appliance make sure
that your hair is completely dry
OPERATING
INSTRUCTION MANUAL
1. Place the appliance on its base (8) on
a dry smooth horizontal surface.
2. Connect the power cord plug to the
electric mains and set the switch (7) into
the "I" position. The Indicator light (6)
will light up, showing that the appliance is
heating.
3. Wait for the appliance to heat up to the required tem-
perature (approximately 3-5 minutes).
4. Select a small lock of hair (approximately 15 mm wide)
and comb it from roots to tips.
5. Press the lever (4) to open the hair clip (3). Place the
ends of the hair between the work surface (2) and hair
clip (3). Release the lever (4) to grip the hair.
6. Rotate the appliance by the handle (10) to wind the
hair onto the work surface. For your convenience you
may rotate the handle (10) with one hand and sup-
port the appliance by the non-heating tip (1) with the
other.
7. Treat each lock for around 10 - 20 seconds.
6