Télécharger Imprimer la page

Waves WK-103481 Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

27. If the kettle is overfilled, boiling water may be ejected. 
28. The kettle is for household use only, not for outdoor. 
29. This appliance can be used by children aged from 8 years and above and persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge if 
they  have  been  given  supervision  or  instruction  concerning  use  of  the  appliance  in  a 
safe way and understand the hazards involved.   
30. Children shall not play with the appliance.   
31. Cleaning and user maintenance shall not be made by children without supervision. 
32. Keep the appliance and its cord out of reach of children less than 8 years. 
33. The machine should not be operated by means of an external timer‐switch or by means 
of a separate system with remote control. 
34. If  you  wish  to  stop  the  kettle  before  the  water  has  boiled,  you  must  switch  off  the 
appliance before removing the kettle from its base. 
35. Do not remove the lid while the water is boiling. 
36. Insure that the kettle is switched off before removing it from its stand. 
37. This appliance is intended to be used in household and similar applications such as: staff 
kitchen areas in shops, offices and other working environments; farm houses; by clients 
in  hotels,  motels  and  other  residential  type  environments;  bed  and  breakfast  type 
environments. 
 
HOUSEHOLD USE ONLY 
DESIGN 
 
1. Lid   
2. Handle 
3. On/Off Switch   
4. Base 
 
BEFORE USING YOUR KETTLE 
If  you  are  using  the  kettle  for  the  first  time,  it  is  recommended  that  you  clean  your  kettle 
before use by boiling a full kettle of water twice and then discarding the water. 
 
OPERATION OF YOUR KETTLE 
1.
To  fill  the  kettle,  remove  it  from  the  power  base.  Open  the  lid,  fill  with  the  desired 
amount of water to the water kettle. Always fill the kettle below maximum mark.   
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout 
when boiling. Ensure that the lid is firmly in place before connecting the power cord to 
the outlet. 
2.
Position the kettle on the power base. 
3.
Connect the plug into a power outlet. Press the switch downwards on the handle. The 
indicator  will  light  up.  Then  start  to  boil  the  water.  The  kettle  will  switch  off 
automatically  once  the  water  has  boiled.  You  can  shut  off  the  power  by  pressing  the 
switch button upwards at any moment during boiling water. 
NOTE: Ensure that switch is clear of obstructions and the lid is firmly closed. The kettle 
 
All manuals and user guides at all-guides.com
 
‐ 2 ‐

Publicité

loading