Ricatech TAB08 Mode D'emploi page 27

Please set up the different parameter as each information each email supplier offer as following:
Default POP3 server will be "126.com", needed to be change into "pop.126.com"
Port is "110" needed to modify "25" the system default is pop.126.com instead of 126.com PORT
is 110.
Then choose "next", it will enter "check and accept server settings" if it is right, it will appear
"outgoing server setting" as follows:
Modify SMIP, smtp.126.com instead of 126.com
Modify PORT "25" instead of 587
Choose "next", enter set up and check options.