Bayside Furnishings PT3N1C-46-N Mode D'emploi page 10

10. Position the assembled stand at the desired location against a wall. If necessary, adjust the pre-attached
floor levelers at the bottom of the legs (F and G) to level the unit. Now, follow the instructions printed on
the plastic bag containing the tipping restraint Hardware to attach the tip-over restraint to the back frame
and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the tipping restraint hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately.
11. The stand is now ready for use. Be sure to position your Flat Panel TV in the center of the stand.
NOTE: If you choose the tilting wall mount configuration, proceed to PAGE 19.
All manuals and user guides at all-guides.com
Assembly Instructions for Table-top
TV
F
10
G
F/G