Uline H-10216 Mode D'emploi page 4

9. Attach modesty panel (6) to lower and upper
modesty panel connectors (B, C) using eight
M6 x 8 mm bolts (D). Tighten using #4 Allen wrench.
(See Figure 9)
Figure 9
6
10. With a second person, place tabletop upside
down with holes facing up. Carefully flip and align
assembled frame with pre-drilled holes in tabletop.
Install using eight M6 x 15 mm bolts (J) and Phillips
screwdriver. (See Figure 10)
Figure 10
1
PAGE 4 OF 15
ASSEMBLY CONTINUED
C
D
B
D
J
1
11. Insert one plastic cover (7) into each bracket.
With second person, carefully flip assembled
table upright. (See Figure 11) Insert black or silver
grommets depending on preference.
Figure 11
7
7
Completed Assembly
0623 IH-10216