Widex Dex COM-DEX Mode D'emploi page 5

All manuals and user guides at all-guides.com
2. Turn on your device. The first time you do this, the device will be set
in pairing mode and it will automatically connect to your COM-DEX.
This can take a few minutes.
NOTE
Once you have paired your device to your COM-DEX, it will remain so and
will connect automatically if your COM-DEX is on.
Resetting the COM-DEX Remote Mic for a new pairing:
1. Turn on your device.
2. Reset your device to factory settings by pushing both buttons for 5
seconds. The device will be set to pairing mode.
3. Follow the pairing procedure described above.
Using the device - see illustration 4
Remove the protective film before using your device.
Place the device on the shirt collar of the person you'd like to hear.
Turn on the device.
To start and stop streaming, simply push the streaming button on your
Remote Mic. While streaming, the LED will show a green light.
NOTE
If you want to operate your device via the COM-DEX app, you'll need to up-
date the app.
5