Office Star Products FL9097 Instructions De Montage

FAUTEUIL DE DIRECTION SURDIMENSIONNÉ
ÉTAPE 1 ÉTAPE 2
4
3
9
1
2
ÉTAPE 4 ÉTAPE 5
7
10
8L
9
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la roulette (2) s'enclencher.
ÉTAPE 2 Fixer les Accoudoirs (7L et 7R) au Coussin du siège (5) avec trois Rondelles plates (8) et trois Vis courte (9) pour chaque
Accoudoirs (7). RESSERRER COMPLÈTEMENT TOUTES LES VIS COURTE (9) AVEC CLÉ ALLEN (12).
ÉTAPE 3 Fixer la Plaque du siège (4) au Coussin du siège (5) avec la flèche vers l'avant du siège avec quatre Rondelles plates (8) et quatre
Vis courte (9). RESSERRER COMPLÈTEMENT TOUTES LES VIS COURTE (9) AVEC CLÉ ALLEN (12).
ÉTAPE 4 Fixer le Support du dossier (11) au bas du Coussin du siège (5) sur le haut de Plaque du siège (4), A VOIR DÉTAIL. Fixez les trous avant de
Support du dossier (11) avec deux Rondelles plates (8) et deux Vis longue (10), fixez les trous à l'arrière de Support du
dossier (11) avec deux Rondelles plates (8) et deux Vis courte (9). RESSERRER COMPLÈTEMENT TOUTES LES VIS A
VEC CLÉ ALLEN (12).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le vérin pneumatique (3)
et mettre de la pression vers le bas.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
FL9097
EN SIMILI-CUIR
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
9
7
8R
9
5
6
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Souflett . . . . . . . . . . . . . . . . . . . . . 1
3 5. Plaque du siège . . . . . . . . . . . . . . . 1
6. Coussin du siège . . . . . . . . . . . . . . 1
7. Coussine du dossier . . . . . . . . . . . 1
8. Bras (7L et 7R) . . . . . . . . . . . . . . . 2
9. Vis . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Bouchons en plastique . . . . . . . . 8
11. Clé Allen (non montré) . . . . . . . . . 1
© Office Star Products Mars 2012
6
1
QTÉ
LIMITED WARRANTy
Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in
normal use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
FL9097
OVERSIZE FAUX LEATHER EXECUTIVE CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the tension
of the tilting feature. Turn knob (2) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension. To lock return chair to the upright position and push
lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment knob
completely.
WARNING
2
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.