Télécharger Imprimer la page

Camplux AY132 Serie Mode D'emploi page 21

Publicité

Les langues disponibles

Les langues disponibles

7. Turn on your water output device to the "on" position and adjust to the desired
water flow.
8. There will be a series of audible clicks and the burner will ignite. Please take
note the water heater must not be exposed to flammable vapors or liquids
during lighting. Should the burner not ignite after 5 seconds, shut off and go to
the "Troubleshooting" section.
9. Upon completion of use or storage, open the drain valve (ribbed cylindrical
stem next to the water input valve) to ensure draining of water.
10. Turn off your gas supply.
12. WARNING: If the outside temperature is around or below freezing
(32 °F/ 0°F), ensure that the drain plug is opened and water drained from the
portable tankless water heater after each use to avoid internal damage to
the heat exchanger. You will also need to unhook the outgoing water line to
ensure that any water in the heat exchanger is drained. Failure to properly
drain your portable tankless water heater will cause water damage which
may or may not be reparable.
8350 Patriot Blvd STE B, North Charleston, SC 29420
Visit Us: Camplux.com
www.camplux.com
BATTERY
GAS
WATER
PACK
INPUT
OUTLET
WATER
INLET
1(844) 538-7475
DRAIN PLUG
support@camplux.com
20

Publicité

loading

Ce manuel est également adapté pour:

Ay132Ay132bAy132g