Publicité
Les langues disponibles
Les langues disponibles
Fax +32 2 359 95 50
Put the shaft of the appliance vertically into the ingredients
•
before pressing one of the switches. This will prevent splashing
when the motor is switched on.
Switch on motor by choosing "Speed I" or "Speed II" and blend,
•
but remember to use for no longer than 1 minute of continuous
motor use. The motor must then be rested for 10 minutes.
Note: we recommend starting with the lower speed setting ("I") and
then increase the blade rotation speed by selecting speed "II" if
needed.
Tips:
Never fill the mixing cup to more than 2/3 full, to prevent over-
•
flowing.
Always blend ingredients together with water or other liquid with
•
the stick blender.
Do not use the stick blender to blend dry, hard foods, such as
•
coffee beans, ice cubes, sugar, cereals, chocolate etc.
Always use the appliance on a secure, dry, level surface.
•
HOW TO CLEAN THE DETACHABLE SHAFT
Caution: Always unplug the unit before cleaning.
•
The motor unit should only be wiped down with a moist cloth.
•
Unscrew the shaft from the screw thread at the bottom of the
•
motor unit, by holding the motor block and gently turning the
shaft clockwise to dis-assemble it.
Wash the shaft under running water immediately after use. If it is
•
very dirty, it can be washed in warm soapy water.
Dry the detachable shaft thoroughly after washing.
•
The mixing cup is dishwasher safe, or can be cleaned in warm
•
soapy water.
NEVER IMMERSE THE MOTOR UNIT IN ANY LIQUID.
•
NOTE: NEVER PUT THE MIXING CUP INTO THE MICROWAVE
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Print only what is inside the frame.
5
Assembly page 5/24
MS 39731 - 120501
Publicité
