Kenwood HDP302WH Instructions page 9

Prune Marinade
Small soft prunes
Runny honey
Water
Processing
Speed
Processing Time (secs)
Mashers
important
Never use the masher in a
saucepan over direct heat. Always
remove the saucepan from the
heat and allow to cool slightly.
Do not tap the masher on the side
of the cooking vessel during or
after mashing. Use a spatula to
scrape excess food away.
For best results when mashing
never fill a saucepan etc., more
than half full with food.
Plastic Masher (if
supplied)
to use the masher
The masher can be used to
mash cooked vegetables such as
potatoes, swede and carrot.
Don't mash hard or uncooked
foods - you may damage the unit.
1 Cook the vegetables and drain.
2 Fit the masher collar to the masher
foot by turning in a clockwise
direction until it locks in
position.
3 Turn the masher upside down and
fit the paddle over the central hub
and turn anti clockwise to secure
. (If the collar is not fitted
then the paddle will not
secure in place).
4 Fit the power handle to the masher
assembly - push to lock.
5 Plug in.
6 Place the masher in the saucepan
or bowl etc.
TYPE HDP30 - press the on
button.
TYPE HDP30
75g
325g
Refrigerated overnight
20g
(at room temperature)
Add the ingredients to
the chopper bowl in the
order stated above.
Turbo
5
TYPE HDP40 - select a low speed
on the variable control and then
press the on button.
Move the masher in an up and
down movement throughout
the mix until the desired result is
achieved.
7 After use release the on button and
unplug.
8 Press the blender shaft release
buttons to release the masher
assembly.
9 Remove the paddle from the
masher by turning clockwise.
10 Unscrew the collar from the
masher foot.
to use the masher
The masher comes with two
screens which can be used as
follows:-
Coarse screen - to mash
cooked vegetables such as
potatoes, swede, yams and carrot.
Fine screen - to mash cooked
or soft fruits and vegetables.
Don't mash hard or uncooked
foods you may damage the unit.
1 Cook hard vegetables and fruit and
drain first before mashing.
2 Fit the masher collar to the masher
shaft by turning in a clockwise
direction until it locks in position
3 Fit either the coarse or fine
screen to the masher shaft – turn
clockwise to lock
6
TYPE HDP40
Add the ingredients to
the chopper bowl in the
order stated above.
Fit the lid and refrigerate
overnight.
Max Turbo
Metal Masherpro™ (if
supplied)
.
50g
325g
60g
3
.