DeFelsko PosiTest HHD Serie Notice D'instruction page 10

of the PosiTest HHD C to a voltage within the 500V – 1,000V range
in 10V steps, and 1kV – 30kV range in 100V steps. The PosiTest
HHD C integrated voltmeter is accurate to ± 5% of the generated
test voltage.
The PosiTest HHD C Verifier is available for verifying the accuracy
of the PosiTest HHD C and other continuous DC high voltage
holiday detectors and is an important component in fulfilling both
ISO and in-house quality control requirements.
Learn more at: https://defelsko.com/hhdc/verifier
Battery Status, Charging, and Installation
The PosiTest HHD C Kit includes four removable, rechargeable
18650 Lithium-ion cell batteries. It is recommended that the batteries
be charged after each use.
The battery icon on the display will turn red
with one bar remaining when the batteries are
low. This indicates that the batteries require
charging.
To charge the batteries, insert them into the
supplied charger. Each time the charger is
connected to a power supply, and no buttons
are pressed, the charger will enter the default
charging mode, appropriate for the supplied
batteries.
Protected 18650 Lithium-ion cell batteries are recommended for use
with the PosiTest HHD C. Only batteries supplied by DeFelsko
should be used.
Storing the PosiTest HHD C
When not in use, the PosiTest HHD C should be stored in the
supplied hard shell case. Keep the instrument clean and dry. After
use, clean the instrument with a soft, damp cloth, and then wipe dry.
Do not use solvents such as lacquer thinner, methyl ethyl ketone
(MEK), etc.
IMPORTANT:
Keep all electrical contacts clean.
9