Publicité
Les langues disponibles
Les langues disponibles
Use a tool, such as a screwdriver, to take out the
it into the square hole. When fixed, the
being re-mounted onto the mounting bracket.
Take out the
pin
1
18
red
pin from its insert and push
red
part will prevent the device from
Fix the
pin
2
Warnings and Limitations
Smoke alarms only work if they are properly installed, maintained, and
if smoke reaches the alarm. The following warnings and indications will
help avoid false alarms or trouble signals:
■
This smoke alarm will not work if it has not been powered on. To power it
on, follow the setup instructions in this quick start guide.
■
This smoke alarm uses photoelectric detection technology to detect smoke
in a residential environment. Photoelectric detection is generally more
sensitive than ionization technology at detecting large particles, which
tend to be produced by slow-smoldering fires. Sources of large particles
include cigarettes burning in couches or bedding.
It is also recommended to purchase and install ionization smoke alarms,
■
which are more sensitive to small particles from fast-flaming fires. Sources
of small particles include paper burning or grease fires in the kitchen.
■
NOTICE:
The National Fire Protection Association standard requires that
smoke alarm batteries last at least 10 years and be non-replaceable and
non-removable. Our batteries are certified by the relevant authorities to
meet these requirements on a stand-alone basis. However, if you pair an
Ooma smoke alarm with an Ooma Telo Base Station, the battery life may
not last 10 years. To maximize optimum battery life, you must make sure
the Smoke Alarm has a good and uninterrupted connection to the Ooma
19
Publicité
