CRESTO RESQ RPX200 Mode D'emploi page 14

1 2 . 4 2 8 0 K G L I F T I N G W I T H R P X 2 0 0
Note! If needed, the RPX200 will handle shorter lifting operations with up to 280 kg. This excess of load will increase the force onto
the handwheel. And should only be used for short lifting operation e.g. "pick off" rescue.
Note! Be aware of slippage when lifting loads over 210 kg. If slippage occurs, put a slight counterpull onto the trailing rope.
Warning! Always use both friction loops when handling loads over 140 kg of lifting. It might be impossible in the transition from
lifting to descending to stop the descent if not configurated for loads over 200 kg.
12.4
RESQ RPX200 & EPX200 | v-2 | Master EN | 13