König Electronic SEC-DVR201 Mode D'emploi page 4

All manuals and user guides at all-guides.com
Overview menu:
Camera Select
Record Select
Record Mode
Record Frame Rate
Video Quality
Record Schedule
Sub Menu
Hard Drive Setup
Motion Setup
Restore Factory Default
Camera select:
The recorder can display up to
4 cameras in one picture (Quad
Mode). To configure which
camera is displayed:
Press " Select" to modify
settings and press " CH1", "
CH2", " CH3", " CH4" to set
each channel separately. If no
channel is open, the recorder will
display "OFF".
Record select:
Select which camera(s) need to be recorded. Press "
selection is established.
Record mode:
There are two methods of recording
Each Mode
Record each channel separately, therefore it's possible to enlarge a single channel to
full screen display. For example, turn off record function of CH-1 and CH-2 and then the
recorder only records CH3 and CH4.
Press " CH1", " CH2", "
playing after recording.
Auto Record
Password Setup
Password Change
Picture Setup
Time Setup
CH3", " CH4" to choose the channel to display when
4
Select" until the desired