Télécharger Imprimer la page

Glacier bay Mandouri Serie Instructions page 2

Publicité

in Bar Only
18
– No Extensions
in Bar Only
18
– No Extensions
in Bar Only
18
– No Extensions
in Bar + (1) 3 in
18
in Bar + (1) 3 in
18
in Bar + (1) 3 in
18
in Bar + (2) 3 in
18
in Bar + (2) 3 in
18
in Bar + (2) 3 in
18
Unscrew Set Screw at base of each post. Use the included installation
template to guide you in installing the product at the correct length.
For 18 in Installation - Use Marking A and B. For 21 in Installation - Use
Marking A and C. For 24 in Installation - Use Marking A and D. Position
the template on the wall where desired and lightly mark outline of post.
Unscrew Set Screw at base of each post. Use the included installation
template to guide you in installing the product at the correct length.
For 18 in Installation - Use Marking A and B. For 21 in Installation - Use
Marking A and C. For 24 in Installation - Use Marking A and D. Position
the template on the wall where desired and lightly mark outline of post.
Unscrew Set Screw at base of each post. Use the included installation
template to guide you in installing the product at the correct length.
For 18 in Installation - Use Marking A and B. For 21 in Installation - Use
Marking A and C. For 24 in Installation - Use Marking A and D. Position
the template on the wall where desired and lightly mark outline of post.
Center Mounting Bracket horizontally in outline of Posts. Verify
Mounting Point with Level. Fig. 2.
Centra los Soportes de Montaje horizontalmente en el contorno del
poste dibujado. Veirifica el Punto de Montaje con un nivel. Fig. 2.
Centrez les Support de fixation horizontalement sur le tracé du
montant. Ajustez les points de montage avec un niveau. ( Figure 2)
Extensions
Extensions
Extensions
Extensions
Extensions
Extensions
in
CLEANING AND CARE:
18
Installation
in
Installation
18
CARE SHOULD BE GIVEN TO THE CLEANING OF THIS PRODUCT.
in
TO CLEAN THIS PRODUCT,SIMPLY WIPE GENTLY WITH
Installation
18
A DAMP CLOTH AND MILD SOAP.
USE A DRY TOWEL TO BLOT THE PRODUCT DRY .
DO NOT USE ABRASIVE CLEANERS AS THIS CAN CAUSE
DAMAGE TO THE FINISH AND VOID THE WARRANTY.
CLEANING AND CARE:
in
Installation
21
CARE SHOULD BE GIVEN TO THE CLEANING OF THIS PRODUCT.
in
Installation
21
TO CLEAN THIS PRODUCT,SIMPLY WIPE GENTLY WITH
in
Installation
21
A DAMP CLOTH AND MILD SOAP.
USE A DRY TOWEL TO BLOT THE PRODUCT DRY .
DO NOT USE ABRASIVE CLEANERS AS THIS CAN CAUSE
DAMAGE TO THE FINISH AND VOID THE WARRANTY.
CLEANING AND CARE:
in
Installation
24
CARE SHOULD BE GIVEN TO THE CLEANING OF THIS
in
Installation
24
TO CLEAN THIS PRODUCT,SIMPLY WIPE GENTLY WITH
A DAMP CLOTH AND MILD SOAP.
in
24
Installation
USE A DRY TOWEL TO BLOT THE PRODUCT DRY .
DO NOT USE ABRASIVE CLEANERS AS THIS CAN CAUSE
DAMAGE TO THE FINISH AND VOID THE WARRANTY.
Front View
Vista Frontal
Vue de face
Mounting Bracket
Soporte de Montaje
Support de fixation
Wood Screw
Tornillo para Madera
Vis à bois
Drill 1/4 in hole in the drywall. Push in Plastic Anchors flush into the
drywall. Fasten Mounting Bracket to wall with Wood Screw. Fig. 3.
Perfora un orificio de 0,6 cm en el drywall. Empuja los anclajes
plásticos hasta que queden al ras en la pared. Fila el Soporte de
Montaje con tornillos para madera. Fig. 3.
Percez des trous de 6,3 mm (1/4 po) dans la cloison sèche.
Enfoncez les chevilles de plastique dans le mur. Fixez les Supports
de fixation au mur avec les vis à bois. (Figure 3)
Front View
Vista Frontal
Vue de face
Mounting Bracket
Soporte de Montaje
Support de fixation
Wood Screw
Tornillo para Madera
If mounting into a wood wall, Fasten Mounting Bracket flush into the
wall with Wood Screw without drilling the holes. Fig.4.
Si estás instalando en una pared de madera, fija el soporte de
montaje con tornillos para madera sin perforar orificios. Fig.4.
Si vous installez les articles sur un mur en bois, fixez les Supports de
fixation au mur avec les vis à bois sans percer de trous au préalable.
(Figure 4)
Place Post over Mounting Bracket and secure with Set Screws. Fig. 5.
Coloca el poste sobre el soporte de montaje y asegúralo con los
tornillos de fijación. Fig. 5.
Placez le montant sur les Supports de fixation et fixez-le avec des
vis de pression. (Figure 5)
2
Side view
Vista lateral
Vue de côté
Wall
Pared
Mur
Plastic Anchor
Anclaje Plástico
Cheville de plastique
Side view
Vista lateral
Vue de côté
Wall
Pared
Mur
Vis à bois

Publicité

loading

Ce manuel est également adapté pour:

Mandouri 262a-8801Mandouri 262a-8802Mandouri 262a-8804Mandouri 262a-8827h2Mandouri 262a-6001Mandouri 262a-6002 ... Afficher tout