Motomaster 299-6952-8 Guide D'utilisation page 7

Model no. 299-6952-8 / Contact us
Press pressure preset buttons '+' or '-' to check the preset pressure. The preset
1
pressure is set at 35 PSI when manufactured.
Adjust your desired pressure by pressing the preset buttons '+/-'. Press button '+'
2
to increase the pressure and press button '-' to decrease the pressure. Once the
desired pressure is reached, stop pressing the preset buttons. The display will
return to 0 PSI automatically which means the pressure is preset successfully and
the product is ready for inflating.
While inflating, do not press button '+' or button '-' as this will cause the air
3
compressor to stop working.
Inflating tires
Roll out the 12 V cord and connect the 12 V adaptor to the vehicle's 12 V outlet.
1
Adjust to your desired pressure. (Refer to Pressure Preset)
2
Screw the thread connection onto tire's valve stem.
3
Press the compressor button and the compressor will begin to operate.
4
Press working light button for visibility in the dark. Press again to turn it off.
5
When car or bicycle tire's pressure reaches preset pressure, the air compressor will
6
stop automatically.
Remove the thread connection from the tire and disconnect the 12 V adaptor.
7
Inflating sports equipment and/or small inflatables
Roll out the 12 V cord and connect the 12 V adaptor to the vehicle's 12 V outlet.
1
Adjust to your desired pressure. (Refer to Pressure Preset)
2
Screw the ball/balloon adaptor into the thread connection.
3
Insert the ball/balloon adaptor into valve of objects to be inflated.
4
Press the compressor button and the compressor will begin to operate.
5
Press working light button for visibility in the dark. Press again to turn it off.
6
When the preset pressure is reached, the air compressor will stop automatically.
7
IMPORTANT
1. The product records the latest preset pressure. For example, if your preset pressure gauge is
35 PSI, the product records the preset pressure at 35 PSI for the next time.
2. Before reaching desired pressure, the compressor can shut off manually by pressing the
compressor button.
3. Do not adjust the preset pressure below the pressure of the object, or the air compressor
cannot start.
All manuals and user guides at all-guides.com
1 888 942-6686
7
TM/MC