Philips RQ1095 Mode D'emploi page 22

English
2
remove the battery for you and will dispose of it
in an environmentally safe way.
disposal of the shaver battery
Only remove the battery when you discard the
shaver. Make sure the battery is completely empty
when you remove it.
1 Remove the shaver from the Power Pod or the
Jet Clean System.
2 Let the shaver run until it stops.
 Pull the shaving unit off the shaver.
 Undo the 2 screws on the back of the shaver.
5 Insert a screwdriver between the front and
back panel to open the shaver.
6 Remove the side panels.
 Unscrew the  screws on the inside of the
shaver and remove the back cover.