Exquisit HL 32026 we Manuel Du Propriétaire page 24

FAN
▶Turn the fan on by turning the function knob to "
thermostat to the maximum position.
▶You can use the fan at any time during the year to circulate the air within the
room.
HEATING
▶Turn the function knob to "I" for 1000w heat setting and "II" for 2000w heat
setting.
▶For greater economy use the 1000w heat setting initially and then switch to the
2000w heat setting.
▶For the 1000w and 2000w heat settings the fan remains at the same settings,
only the elements used change to create the greater/lesser heat flow.
THERMOSTAT CONTROL IN FUNCTION
KNOB
The thermostat is used to control the room temperature. It acts as a switch and
does not vary the amount of heat output from the heater.
TEMPERATURE SETTING
▶Turn the function knob to high temperature setting.
▶Once the desired room temperature is reached, slowly turn the thermostat knob
clockwise until you hear a click. The heater will now stop operating.
▶The heater will turn on and off automatically maintaining the room temperature
that you have set.
" and rotating the
22
ENG