Publicité
Les langues disponibles
Les langues disponibles
FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm
PIP/POP/PBP
You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-Outside-
Picture (POP), or Picture-By-Picture (PBP).
For POP, you can select from three different POP options:
•
POP1
—
POP3
•
—
the right.
•
POP12
BACK
PIP/POP/PBP
TRANSPARENCY
SIZE
HORIZONTAL POSITION
VERTICAL POSITION
PIP SOURCE
AUDIOS SOURCE
windows. When you are selecting the horizontal orientation, - moves the window left and + moves
the window to the right. When you are adjusting the vertical orientation, 0 is at the top of the
screen and 100 is at the bottom of the screen.
POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected
channels that appear in the windows. Sequential rotates through each window and plays all of the
preselected channels. The rotation runs through all the available channels before it starts again at
the lowest channel.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 2 / 0 4 – F O R P R O O F O N LY
26
Using the On-Screen Display
All manuals and user guides at all-guides.com
One large POP window to the left and a smaller, centered window on the right.
One large POP window to the left and three smaller, vertically-aligned windows on
One large, centered POP window surrounded by twelve smaller windows.
—
PIP/POP/PBP
The remote control offers the following
PIP/POP/PBP options:
•Use the PIP button or the POP PBP button
on the remote control to turn on and off PIP,
POP, and PBP.
PIP
•If you are in PIP, POP, or PBP mode, use the
38
SWAP button on the remote control to
switch between the two windows.
38
38
•Use the POS button on the remote to
change which corner of the screen the PIP
38
window appears.
TV
MAIN
In the OSD, you can adjust the
Transparency, the Size, and H (horizontal)
and V (vertical) position of the PIP/POP/PBP
Publicité
