Kalorik USK M 1 Mode D'emploi page 6

Press the release button of the bracket and
•
put the bracket in oblique position (see
picture 2 further in this manual).
You can now insert the dough hooks or the
•
beaters. The beaters may be installed in
any of the holes. The dough hooks, on the
other hand, must be attached in a specific
way. Make sure to insert the attachment
fitted with a disc into the largest opening.
Turn slightly until they are correctly
attached.
Once the hooks or beaters are assembled, put the bowl on the
•
base.
Press the bracket release button to bring
•
the bracket together with the appliance
in horizontal position in order to immerse
the attachments in the bowl.
You can now plug in the appliance and select a speed. The
•
rotary disc on the base, under the bowl, allows you to turn the
bowl manually.
To remove the appliance from the
•
bracket, the attachments need to be
removed first. Put the switch in "0" position
and unplug the appliance. Put the
bracket in oblique position by pressing its
release button and then push the
ejection button in order to release the
attachments. Once the attachments
have been removed, press the appliance
release button and lift the appliance.
6
USK M 1 - 051107