Nexans OUTDROP 2+ SFM Instructions page 19

5.2. Cas de l'installation directe sur poteau
Direct pole mounting
1. Localiser les fentes au dos du boîtier
OUTDROP 2+ SFM.
2. Insérer un collier de fixation (feuillard inox)
dans les fentes.
La largeur du collier (feuillard
inox) ne doit pas dépasser 25mm.
ABS1498/B
All manuals and user guides at all-guides.com
Fig. Installation du collier de fixation
Installing the mounting strap
OUTDROP 2+ SFM
1. Identify the slots at the rear of the OutDrop
2+ SFM.
2. Insert the mounting strap (stainless steel
metal strip) in the slots.
The width of the mounting strap
(stainless steel metal strip) must
not exceed 25mm.
25mm
(max.)
19/36