Koss KS5121 Guide D'utilisation page 12

All manuals and user guides at all-guides.com
STEP 1:
STEP 2:
The setting will change to Progressive Scan ON.
TV with PROGRESSIVE SCAN is needed, otherwise
picture will be distorted or no picture.
To resume NON-PSCAN picture, press (V. Select)
key a few times until picture is OK.
Do you want to continue?
No, keep using component output.
Yes, switch to Progressive Scan output.
2.5 JPEG Interval
1. Use or button to select Video and
press OK.
2. Use or button to select JPEG Interval
and press OK.
3. Press OK repeatedly to select among 5
Seconds, 10 Seconds and 15 Seconds.
4. Use button to return to the main menu
bar.
2.6 Progressive Scan
1. Use or button to select Video and
press OK.
2. Use or button to select Video Out
and press OK.
3. Use button to shift to P-SCAN, and
press OK to confirm selection.
4. A warning message will follow, select Yes
and press OK to confirm.
5. Use button to return to the main menu
bar.
Note: No video output when your TV system
does not support progressive scan in.
3. AUDIO Setting
3.1 Digital Output
1. Use or button to select Audio and
press OK.
2. Use or button to select Digital Output
and press OK.
3. Press OK repeatedly to select among
Digital Output options or turn the Digital
Output off.
4. Use button to return to the main menu
bar.
3.2 Down Sampling
1. Use or button to select Audio and
press OK.
2. Use or button to select Down
Sampling and press OK.
3. Press OK repeatedly to select between
96K and 48K.
4. Use button to return to the main menu
bar.
Page 11