Bayside CALYPSO Instructions D'installation page 7

Calypso Installation Instructions
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.4)
Blade attachment
1. Before Installing the blades, remove the motor screws.
2. Secure the blade on the motor by using 2 screws to tighten it, ensuring they are tightened
simultaneously. (Take care not to over tighten as this can damage blades).Once completed, repeat
the process on the remaining blades.
Light kit installation (For fan with light)
Install the globe (Not included, Max. 9W, GX53) in the lamp holder.
Lift and attach the glass to the base and secure it by using three spring
clips.
7 | P a g e
All manuals and user guides at all-guides.com
HANGING THE FAN
INSTALLING THE FAN
Fig. 4
Fig. 5
Fig. 6
Fig. 6