Kevin Nash group siren s5r Mode D'emploi page 4

All manuals and user guides at all-guides.com
4. Press the button once and the
second LED will light up on the
handset, notifying you that head one
is now programmed and head two is
waiting. Spin the wheel on the second
S5R head manually to synchronise
head two.
5. Press the button once and the third
LED will light up on the handset.
Repeat the process for the remaining
heads.
6. Once all the heads have been
programmed press and hold the
button for 3 seconds until all handset
LEDs are off. Now all heads are
synchronised to the
handset.
Note: If the handset is left idle for 10
seconds it will discard any newly learnt
heads & return to normal operation.
P4
S5R USER MANUAL