Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
NOT damage the Signal Booster, nor do
they pose a fire risk to the vehicle. Again,
be sure to place your Signal Booster in a
location with adequate ventilation and away
from direct sunlight or moisture .
Understanding the Drive 3G-M
Signal Booster Lights
The Signal Boost includes 3 indicator
lights on the front of the Drive 3G-M . The
indicator lights will either be green or red .
Green indicates that the booster is
powered and operating at maximum
gain .
Solid Red indicates that the booster
has shut off on the associated
frequencies to prevent oscillation
(feedback) .
Green/red Blinking indicates that the
booster is operating at a reduced gain
to prevent oscillation (feedback) .
Fixing Red Light Issues
If one or more lights on the Signal Boost
are red:
1 .
Make sure all connections are tight .
2 .
Increase the distance between the
outside antenna and the Drive 3G-M,
by moving them horizontally and/or
vertically farther apart until the light(s)
change to green . Remember to keep
the antenna at least 6 inches from
any window or sunroof .
3 .
Follow the same steps for a green/red
blinking light until the light goes solid
green .
4 .
If more separation is not possible and
the coverage of the booster is too
small with a green/red blinking light
indicating reduced gain, contact the
Customer Support Team for
assistance: 866-294-1660 .
Need help?
http://cellphonesignalbooster.us
Lights Off
1 .
Check connections on the power
supply to see that it is firmly plugged
into both the Drive 3G-M and the
power source .
2 .
If using a DC power supply in your
vehicle, ensure the power supply is
properly inserted . Then check the
12 volt power from the car socket
and the fuse . Replace the fuse if
necessary .
3 .
If using a power strip in a building,
ensure the power strip is plugged
in and turned on and that power is
coming from the outlet .
NOTE: The Signal Booster can be reset by
disconnecting and reconnecting the power
supply .
Additional FAQ:
What hours can I contact customer support?
How does weather affect the performance of
my outside antenna?
Water vapor (e .g . rain, fog, snow or other
precipitation) creates an effective filter to cellular
signal . In times of heavy precipitation, you may
see less performance .
What's the difference between the 800 MHz
and the 1900 MHz bands? How do I know
which MHz band my cell phone uses?
The Drive 3G-M works with all major North
American cellular providers on the 800 & 1900
MHz frequencies . Traditionally, 800/1900MHz are
associated with voice and 3G data; while 700MHz
and 1700/2100MHz are associated with 4G data .
Carrier Frequency Use
5
Publicité
