Publicité
Les langues disponibles
Les langues disponibles
1 Long press P button for 2-3 seconds.
2 You will see 00:00 hour information. Set the minute with up and down buttons.
3 Press
button again to set hour. Set the hour with up and down buttons.
4 Press
button again to set weekday. Select the day with up and down buttons.
5 Save your settings by pressing ON/OFF button or wait about 15 seconds.
The controller acquires the room temperature with its integrated sensor and maintains the set point
by delivering control commands. The switching differential is 0.5 °C.
• Set point of room temperature shall be set by pressing up and down button.The controller acquires
the room temperature with its integrated sensor.
• If the room temperature falls below the selected set point, the heating contact will close.
• If the room temperature exceeds the selected set point, the cooling contact will close.
• The digital display shows the actual room temperature, the setting room temperature and the
symbol of the operating mode currently active.
• When the heating output is activated, the heating symbol appears, or vice versa.
NOTE: To change the mode press the
temperature. The controller runs the pre-set program. The next chapter shows how to change the
pre-set program settings.
This functions allows to program heating periods for Weekdays, Saturday and Sunday. You can pro-
gram 4 heating periods per day. Settings programmes for one of the weekdays will be automatically
adopted for the other weekdays. Saturday and Sunday can be programmed seperatly.
1 Press the
button for 2-3 seconds. The actial time flashes at the upper left-hand corner. If you
do not want to make any changes press the
2 On the upper left-hand corner the weekday flashes. Use the up and down buttons to set the actual
weekday. Press the
3 Use the up and down buttons to set the time for the first heating period. The number in the right
corner at the bottom shows, which heating perios is actually being set. Press the
4 Use the up and down buttons to set the preferred temperature. Press the
other 3 heating periods of the day the same way. Each press of the
item setting.
5 After having set all 4 heating periods of the day press
(Saturday). Set all the 4 hating periods the same way and confirm you settings with the
6 Above the clock you will see „7" (Sunday). Set all the 4 hating periods the same way. After the last
stting confirm your settings with the On/Off button.
Hinweis: To change the mode press the
room temperature. No the temperature can be set manually.
All manuals and user guides at all-guides.com
Hour/Weekday Setting
Manual Setting
button on the controller till „PRG" appears above the room
5+1+1 Program Setting
button to confirm.
button twice.
again. Above the Time you will see „6"
button on the controller till „MAN" appears above the
button again.
button to set the
button will go to the next
button.
10
Publicité
