Publicité
Liens rapides
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
25-0560
25-0565
ITEM
QTY
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
2
FRONT BRACKET
4
2
REAR BRACKET
5
2
SUPPORT BRACE
6
4
SPACER TUBE
7
4
1/2-13 X 1.75" HEX HEAD BOLT
8
2
1/2-13 X 1.50" HEX HEAD BOLT
9
8
1/2" FLAT WASHER
10
6
1/2" LOCK WASHER
11
2
1/2-13 HEX NUT
12
4
1/2" EXTERNAL TOOTH LOCK WASHER
13
4
M12-1.75 HEX NUT
1,2
2
ESTRIBOS, LADO DEL ACOMPAÑANTE
3
2
SOPORTES DELANTERA
4
2
SOPORTES TRASERA
5
2
PIEZA DE SUJECIÓNDEL SOPORTE
6
4
TUBO SEPARADOR
7
4
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 1,75"
8
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 1,50"
9
8
ARANDELAS PLANAS DE 1/2"
10
6
ARANDELAS DE PRESIÓN DE 1/2"
11
2
TUERCAS HEXAGONALES DE 1/2-13
12
4
ARANDELAS DE PRESIÓN DE DENTADO EXTERIOR DE 1/2"
13
4
ARANDELAS DE PRESIÓN DE M12-1,75
1,2
2
MARCHE-PIEDS,
3
2
SUPPORTS AVANT
4
2
SUPPORTS ARRIÈRE
5
2
RENFORTS POUR SUPPORTS
6
4
TUBE D'ESPACEMENT
7
4
BOULON À TÊTE HEXAGONALE DE 1/2-13 X 1,75 PO
8
2
BOULON À TÊTE HEXAGONALE DE 1/2-13 X 1,50 PO
9
8
RONDELLE PLATE 1/2 PO
10
6
RONDELLE À FREIN 1/2 PO
11
2
ÉCROUS HEXAGONAUX 1/2-13
12
4
RONDELLE À FREIN A DENTS EXT RIEURES,1/2 PO
13
4
ÉCROUS HEXAGONAUX M12-1,75
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions com-
pletely before beginning.
STEP 2.
Attach brackets to step bar using 1/2" fasteners as shown. Leave loose.
STEP 3.
Attach step bar to body mounts as shown.
STEP 4.
Loosen existing hex nut near rear body mount and slip rear brace behind hex nut. Attach other end of rear
brace to bracket using 1/2" fasteners as shown
STEP 5.
Repeat installation for opposite side.
STEP 6.
Make sure step bar and brackets are properly aligned with vehicle and tighten all fasteners. Recommended
torque value is 64 Ft. Lbs. for 1/2" fasteners.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g.
Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to
corrosion.
All manuals and user guides at all-guides.com
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 1982-97 FORD RANGER REGULAR CAB
APLICACIÓN: FORD RANGER CON CABINA REGULAR, MOD. 1982-97
APPLICATION: FORD RANGER CABINE REGULIÈRE 1982-97
2
CONTENTS -
CONTENIDO
(1)
PASSAGER (1)
ET
CONDUCTEUR (2)
É
1
- CONTENU
Y EL CONDUCTOR
(2)
.
WO:
5
3
4
6
TOOLS -
HERRAMIENTA
3/4" SOCKET
3/4" WRENCH
19MM SOCKET
RATCHET
TORQUE WRENCH
DADO DE 3/4"
LLAVE DE TUERCAS DE 3/4"
DADO DE 19MM
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
Cl 3/4 PO
É
DOUILLE 19MM
CLIQUET
CL DE COUPLE
É
75-0126 REVISION C 9/3/08
- OUTILS
Publicité
Manuels Connexes pour Westin 25-0560
Sommaire des Matières pour Westin 25-0560
- Page 1 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Page 2 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non-abrasive (par exemple, Pure Carnauba) de façon régulière. L ’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible, puisque les composantes strient la finission et la laissent vulnérable à...