Publicité
Les langues disponibles
Les langues disponibles
7
All manuals and user guides at all-guides.com
9. Set the vanity (A) back to the intended posi-
tion, aligning holes with anchor positions.
10. Install the anchor hardware (B) in the follo-
wing order: flat washer (S), black washer (C2),
and screw (C1). Turn screws (C1) using Phillips
screwdriver until the anchors (C) expand inside
wall.
11. Install the Cirtangular
lavatory according
®
to the installation instructions provided with
the lavatory. The top of your Cirtangular-
Knightsbridge
vanity (A) features a channel
®
custom fit for your lavatory to provide a solid
seal and clean, straight lines.
12. Install the knobs (H) on the door with 1"
bolt (I) and on the drawer with 1 ¼" bolt (Q)
using a Phillips screwdriver.
13. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the ap-
propriate location.
14. If needed, drawer glides can be adjusted for
height.
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
8
Publicité
