Publicité
Les langues disponibles
Les langues disponibles
Fitting Instructions
Control Unit, lights
EN
Lighting module for indicator branch for the
simulation of bulbs when using LED bulbs.
The corresponding current, e.g. for the flas-
hing lights, is used, a portion of this is passed
to the LED lamp and the superfluous portion
is fed back into the vehicle electrical system.
In the case of LED failure the simulation is
www.herthundbuss.com
stopped. Function: The load of a bulb is elec-
tronically simulated. The failure of the LED
is signalled to the chassis using the output
monitoring. The unit is characterised by a
very low level of heat development. Connec-
tion of terminal 30 (+battery) and terminal 31
(ground) is mandatory! (Energy feedback)
75614280 | -281
Technical data:
4
Publicité
