Publicité
Liens rapides
© 2012, Moog Videolarm, Inc. All Rights Reserved
P F H 1 0
Outdoor Tubular Dust-Proof and Pressurized Environmental Housings
Installation and Operation Instructions for the following models:
PFH10C2W
An Pressurized tubular housing, 24Vac or 12Vdc input, heater & blower with
feed-thru wall / pole mount
PFH10C2WY
Pressurized tubular housing, 24Vac or 12Vdc input, heater & blower with
feed-thru wall / pole mount, adjustable sunshield
PFH10C8WY
Pressurized tubular housing, PoE input with Dynamic Power Allocation, 30 watt
midspan included, heater & blower with feed-thru wall / pole mount, supports
.af PoE cameras, adjustable sunshield
DFH10C2W
Dust-Proof tubular housing, 24Vac or 12Vdc input, heater & blower with
feed-thru wall / pole mount
DFH10C2WY
Dust-Proof tubular housing, 24Vac or 12Vdc input, heater & blower with
feed-thru wall / pole mount, adjustable sunshield
DFH10C8WY
Dust-Proof tubular housing, PoE input with Dynamic Power Allocation, 30
watt midspan included, heater & blower with feed-thru wall / pole mount,
supports .af PoE cameras, adjustable sunshield
Before attempting to connect or operate this product, please read these instructions completely.
All manuals and user guides at all-guides.com
www.moogvideolarm.com
81-IN5480
06-18-2012
Publicité
Sommaire des Matières pour Moog Videolarm PFH10 Serie
- Page 1 All manuals and user guides at all-guides.com © 2012, Moog Videolarm, Inc. All Rights Reserved P F H 1 0 Outdoor Tubular Dust-Proof and Pressurized Environmental Housings www.moogvideolarm.com Installation and Operation Instructions for the following models: PFH10C2W An Pressurized tubular housing, 24Vac or 12Vdc input, heater & blower with feed-thru wall / pole mount PFH10C2WY Pressurized tubular housing, 24Vac or 12Vdc input, heater & blower with...
- Page 2 All manuals and user guides at all-guides.com IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth.
- Page 3 If Purchaser believes that the Product is defective in material or workmanship, then written notice with an explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.
- Page 4 All manuals and user guides at all-guides.com P F H 1 0 Value Features Optional Accessory Multi-Plane Adjustable SunShield position to protect against glare on lens Cable Feed Through hides and protects cables Pop Out Tabs Lanyard Cable allows for safely retains housing pole mounting during installation Installers Connection Board allows for easy hook-ups Hand Hold underlaid grip point Rear Access Panel acts as internal J-Box...
- Page 5 All manuals and user guides at all-guides.com Electrical Specifications Contents of Box PFH10 Power 12VDC Class 2 Only 24Vac (No camera) 12Vdc (No camera) English Midspan 24Vac (Ninguna cámara) Some Models 12Vdc (Ninguna cámara) Español 24Vac (Aucun appareil-photo) 12Vdc (Aucun appareil-photo) Français 24Vac (Keine Kamera)
- Page 6 All manuals and user guides at all-guides.com CAUTION: When assembling the mounting bracket, make sure Proper Assembly of Mounting Bracket all the wiring access holes are facing towards the rear of the base mounts access portal. • PRECAUCIÓN: Al montar la consola de montaje, cerciórese de que todos los agujeros de acceso del cableado son revestimiento hacia la parte posterior del portal bajo del acceso de los montajes.
- Page 7 All manuals and user guides at all-guides.com WALL MOUNTING If you are running a conduit to the housing instead of through Attach mount to wall with suitable hardware (not provided). mount wiring, rst install the appropriate tting to the wall mount. •...
- Page 8 All manuals and user guides at all-guides.com Pole Mount Option (Use Steel Straps to Mount) Gasket Nipples Crimp Cable Ties Cable Cable Feed cable through bracket, pierce the gasket nipples Crimp the connectors as needed. Then use cable ties (as needed). Place the gasket as shown. on the nipples to secure device, leave extra cable.
- Page 9 All manuals and user guides at all-guides.com Communication Power (B- Completely loosen) RJ45 (568B) (A- Slightly loosen) In order to rotate the rear cover, slightly loosen the screw marked (A) and completely loosen the screw marked (B). Then make all of the nessecary wiring connections.
- Page 10 All manuals and user guides at all-guides.com Reference Block [15] Reference Block [15] WARNING! NOTE: Make sure that the Voltage Selector Switch is set for the The power distribution board is designed with a 24Vac / 12Vdc selector switch. If the Switch is set at 24Vac, then voltage input correct input and camera supply voltage before power is should be 24Vac.
- Page 11 All manuals and user guides at all-guides.com Camera Sled Ring Screw Camera Sled Loosen the screws shown on the picture and turn the camera Install the camera using provided screws and rubber spacer, to sled ring to the desired angle and re-tighten. center lens (if needed).
- Page 12 All manuals and user guides at all-guides.com Pressurize the Unit Cont. Place the air chuck on the ll valve and begin lling until pressure relief valve opens. • Coloque la tirada del aire en la válvula del tanque y comience a llenar hasta que la válvula de descarga de presión se abra.
- Page 13 All manuals and user guides at all-guides.com After purging and re lling, check the housings pressure. It should be around 5-7psi (0.35-0.5bar). • Después de purgar y de rellenar, compruebe la presión de las cubiertas. Debe estar alrededor de 5-7psi (0.35-0.5bar). •...
- Page 14 All manuals and user guides at all-guides.com Product Registration/Warranty Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest quality products available and superior customer service. Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators. Register Your Products Online Take a few moments and validate your purchase via the Online Product Registration Form at www.videolarm.com/productregistration.jsp Register your recent Moog Videolarm purchases and benefit from the following: • Simple and Trouble-Free RMA process • Added into customer database to receive product updates / news • Eliminate the need to archive original purchase documents: Receipts, Purchase Orders, etc…...