Troubleshooting - Sage Kinetix Twist BBL405 Guide Rapide

Troubleshooting

Motor doesn't start or
blade doesn't rotate
Food is unevenly
chopped
Food is chopped too
fine or is watery
Food sticks to blade
and jug
Blender overloaded
(all lights flashing)
8
• Check that the power plug is properly inserted into the power outlet.
• Check the ON / OFF button and selected function button is illuminated.
• If all lights are flashing in unison, refer to the 'blender overload'
solutions below.
• This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
• The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
• Try blending for shorter period of time. Use the PULSE function for
better control.
• The mixture may be too thick. Try adding more liquid and/or using a slower
speed for blending.
• This blender has overload protection to prevent damage to the motor.
Unplug and allow the blender to cool down for 15 minutes.
Once cooled, you will be able to use the blender as usual again.
• We recommend blending in smaller batches, or cutting ingredients into
smaller batches.