Publicité
Before first Use
Remove the device and the accessory out of the packaging. Keep
packaging materials out of reach of children. There is risk of suffocation!
Clean all parts of the device before using the first time.
Installing the Charging Station
The vacuum cleaner comes with a specially
designed wall mount/charging station (13)
used to hold the unit so that it can be
recharged while mounted on the wall.
1. Place the wall mount against the wall at the
desired position. Use a spirit level to make
sure it is vertically positioned.
2. Use a sharp pencil to draw the mounting
holes on the mounting surface. Drill holes
at the marked positions
3. Insert the plug of the charger from
the rear side into the wall mount
and twist it horizontally until it
locks in place. By doing this the
plug
cannot
inserting the vacuum cleaner for
charging.
4. Guide the power cord from the
right, the left or from the bottom of the wall mount.
5. Use suitable installation material that is required according to the
surface and install the charging station on the wall.
Note: Before installing the charging station ensure that the power cord
of the charger and no other power lines can be damaged that may be
hidden in the wall.
All manuals and user guides at all-guides.com
Operation
get
loose
when
11
Publicité
