Publicité
Les langues disponibles
Les langues disponibles
Features of Your Hair dryer
Air Outlet
All manuals and user guides at all-guides.com
Cord Retract
Button
Air Intake
Grill
Off/Low/
Medium/High
Switch
Retractable Cord push
cord retract button and
hold electrical plug as it
retracts
Folding
Handle
5
Operating Instructions
This dryer is equipped with an appliance leakage circuit interrupter (ALCI) for your
safety. This device is designed to make the appliance inoperable under some
abnormal conditions (such as accidental immersion in water).
After the appliance is plugged in, you must check your protective device as follows:
1. Press the "Reset" button on the ALCI device.
2. Press the "Test" button. The "Reset" button will pop out. This verifies that the
protective device is working properly.
3. Press the "Reset" button once more to reactivate the safety device and use
your appliance.
REPEAT THE AbOvE PROCEdURE bEFORE EACH USE
TO CONFIRM THAT THE PROTECTIvE dEvICE IS OPERATINg.
To Use Your dryer
The Hair Dryer has 3 settings to control air speed/heat levels.
To control air speed/heat level, toggle the switch to desired
setting.
With the control setting switch in the "OFF" position, plug
the Dryer into a standard 110-125-volt AC outlet. Select speed
(airflow) setting that is most appropriate to your needs and that
will deliver the best results.
When finished using your Dryer, move the control switch to the
"OFF" position and unplug the cord from the outlet.
Caution
Use your SUNBEAM® Hospitality Hair Dryer with care. Directing a high volume of
heat continuously to one area can overheat hair and scalp. When using a High
setting, hold the blower opening a few inches away from the hair, drying one
section at a time. Work layers of hair in quick strokes. Keep the dryer in motion until
drying and styling are complete.
6
Publicité
