Raikko Bass Disc Mode D'emploi page 15

DElIVERY INClUDES
raikko BaSS Disc Bluetooth
®
USB data and charging cable
line iN-cable (3.5 mm jack and micro-USB)
carabiner hook
SwItChING oN/off/oN StaNDbY
Press the switch (a) for 3 seconds to switch the
speaker on or off. When you switch it on you will
hear a signal sound to confirm that the speaker has
been switched on.
auto-standby: if the speaker is not used for 5
minutes, it will automatically go into standby mode
to preserve battery life. To reactivate the speaker,
press the key (E).
attENtIoN!
The speaker is automatically in Bluetooth
mode when switched on. if a device that has
already been connected is within range, it
will connect automatically.
All manuals and user guides at all-guides.com
Speaker
®
®
ChaRGING thE INtEGRatED battERY
Charge the speaker fully before using it for the first
time. The first charge cycle can take up to 6 hours.
Connect the speaker to the USB port on a PC/
MaC™ or a USB mains adapter to charge it. Use the
connection cable provided.
Connect one end to the speaker's charging socket
(micro-USB) (G) and the other end to the appropriate
USB port. The LED (l) display turns red when the
battery is charging. The LED display
when the battery is fully charged.
a complete charge cycle takes approximately
3–5 hours.
attENtIoN!
For a longer battery life, the device should
not be connected for charging for longer
than 8 hours at a time.
(l)
goes off