HBK Z6 Notice De Montage page 6

Explosion protection version option
S
Comply with the relevant code of practice during installation.
S
Comply with the installation conditions cited in the Certificate of Conformity and/or
the Type Certificate.
Qualified personnel
Qualified persons means persons entrusted with the installation, fitting, commissioning
and operation of the product who possess the appropriate qualifications for their func­
tion.
This includes people who meet at least one of the three following requirements:
S
Knowledge of the safety concepts of measurement and automation technology is a
requirement and as project personnel, they must be familiar with these concepts.
S
As measurement or automation plant operating personnel, they have been instructed
how to handle the machinery. They are familiar with the operation of the equipment
and technologies described in this documentation.
S
As commissioning engineers or service engineers, they have successfully completed
the training to qualify them to repair the automation systems. They are also autho­
rized to activate, ground and label circuits and equipment in accordance with safety
engineering standards.
Additional safety precautions
Additional safety precautions to meet the requirements of the relevant national and local
accident prevention regulations must be taken in plants where malfunctions could cause
major damage, loss of data or even personal injury.
The scope of supply and performance of the transducer covers only a small area of mea­
surement technology. Before starting up the transducer in a system, a project planning
and risk analysis must first be implemented, taking into account all the safety aspects of
measurement and automation technology so that residual risks are minimized. This par­
ticularly concerns personal and machine protection. The transducers function passively
and cannot implement any (safety-relevant) cutoffs. In the event of a fault, the relevant
precautions must establish safe operating conditions.
General dangers of failing to follow the safety instructions
The transducer corresponds to the state of the art and is failsafe. The transducer may
give rise to residual dangers if it is inappropriately installed or operated.
4
Z6
SAFETY INSTRUCTIONS