Publicité
Les langues disponibles
Les langues disponibles
Installation of Steel Queen
NOTE: These instructions apply to installation of
GRANITE COUNTERTOPS
that are not compatible with the adhesive that has been supplied.
• Kindred Undermount sinks have a highly polished sink rim. To highlight this unique design feature,
our installation system reveals up to 3/8" of the sink rim.
• Kindred accepts no liability for damage to the natural stone or solid surface countertop, or sink
fixture, during installation.
• Inspect the sink fixture for any shipping damage, prior to installation. Do not install a damaged unit.
• Aesthetics are essential to presentation of the installed sink unit. Take the necessary care to ensure
that the exposed silicone joint is kept to a minimum, the sink is properly aligned to the cut-out, and
excess silicone is cleaned from the sink.
HARDWARE SUPPLIED BY KINDRED
Kindred has supplied within the sink carton a die-cut corrugated template, 3 1/2" sink strainers (waste
assembly), Homeowner's manual, and hardware kit. The kit is intended to clamp the sink rim to the underside
of the countertop, and backup the silicone seal.
This kit includes the following:
Machine screws
Brackets
Thumbscrews
Tee nuts
1" diameter PVC discs
Loctite Prism 401
THE FABRICATOR WILL REQUIRE:
• An assortment of clamps
• A solvent such as methyl hydrate or denatured alcohol
• Silicone sealant
• 1/2" plywood buildup
• 180 grit sandpaper
Kindred Customer Service: 1-866-687-7465
30149
All manuals and user guides at all-guides.com
Undermount Sinks
METHOD TWO
Steel Queen Undermount Sinks with
and any
POLYMER BASED MATERIALS
Use for Method One
• Jig saw
• 1 1/2" router guide bushing
• 1/2" straight cutter bit
www.kindred-sinkware.com
Use for Method Two
0605
Publicité
